Reference Hub

Aquarium Tank Dimensions

Standard external dimensions for 25+ commercial glass aquariums in inches and centimetres. All specifications include a verification status and measurement source. Manufacturer dimensions may vary by production run — always confirm with the manufacturer before purchasing equipment that requires an exact fit.

Dimension Lookup Console // REF.1.0
ONLINE
Unit System
Group: 25 results
Complete Reference

Standard Aquarium Dimensions Chart

All nominal external dimensions. Verify with manufacturer before purchasing fitted equipment.

Nano Aquariums

Scroll horizontally to view full table
TankConfigL × W × H (in)L × W × H (cm)VolumeEst. Filled Wt.Verification
2.5 Gallon Mini Mini 12.1875″ × 6.125″ × 8.125″ 31 × 15.6 × 20.6 2.5 gal ~27 lbs / ~12 kg Mfr. Verified
5 Gallon Standard 16″ × 8″ × 10″ 40.6 × 20.3 × 25.4 5 gal — Multi-Source
5.5 Gallon Standard 16.1875″ × 8.375″ × 10.5″ 41.1 × 21.3 × 26.7 5.5 gal ~62 lbs / ~28 kg Mfr. Verified
10 Gallon Standard 20.25″ × 10.5″ × 12.5625″ 51.4 × 26.7 × 31.9 10 gal ~111 lbs / ~50 kg Mfr. Verified

Small Aquariums

Scroll horizontally to view full table
TankConfigL × W × H (in)L × W × H (cm)VolumeEst. Filled Wt.Verification
15 Gallon High High 20″ × 10″ × 18″ 50.8 × 25.4 × 45.7 15 gal — Multi-Source
15 Gallon Standard 24.25″ × 12.5″ × 12.75″ 61.6 × 31.8 × 32.4 15 gal ~170 lbs / ~77 kg Mfr. Verified
20 Gallon High High 24.25″ × 12.5″ × 16.75″ 61.6 × 31.8 × 42.5 20 gal ~225 lbs / ~102 kg Mfr. Verified
20 Gallon Long Long 30.25″ × 12.5″ × 12.75″ 76.8 × 31.8 × 32.4 20 gal ~225 lbs / ~102 kg Mfr. Verified

Medium Aquariums

Scroll horizontally to view full table
TankConfigL × W × H (in)L × W × H (cm)VolumeEst. Filled Wt.Verification
29 Gallon Standard 30.25″ × 12.5″ × 18.75″ 76.8 × 31.8 × 47.6 29 gal ~330 lbs / ~150 kg Mfr. Verified
30 Gallon Breeder Breeder 36″ × 18″ × 12″ 91.4 × 45.7 × 30.5 30 gal — Multi-Source
30 Gallon Standard 36.25″ × 12.625″ × 16.75″ 92.1 × 32.1 × 42.5 30 gal ~343 lbs / ~156 kg Mfr. Verified
40 Gallon Breeder Breeder 36.1875″ × 18.25″ × 16.9375″ 91.9 × 46.4 × 43 40 gal ~458 lbs / ~208 kg Mfr. Verified
40 Gallon Long Long 48″ × 12″ × 16″ 121.9 × 30.5 × 40.6 40 gal — Multi-Source

Large Aquariums

Scroll horizontally to view full table
TankConfigL × W × H (in)L × W × H (cm)VolumeEst. Filled Wt.Verification
50 Gallon Standard 36″ × 18″ × 19″ 91.4 × 45.7 × 48.3 50 gal — Multi-Source
55 Gallon Standard 48.25″ × 12.75″ × 21″ 122.6 × 32.4 × 53.3 55 gal ~625 lbs / ~283 kg Mfr. Verified
60 Gallon Breeder Breeder 48.5″ × 18.5″ × 16″ 123.2 × 47 × 40.6 60 gal ~543 lbs / ~246 kg Mfr. Verified
60 Gallon Tall Tall 48″ × 13″ × 24″ 121.9 × 33 × 61 60 gal — Multi-Source
65 Gallon Tall 36.375″ × 18.375″ × 25″ 92.4 × 46.7 × 63.5 65 gal ~775 lbs / ~352 kg Mfr. Verified
75 Gallon Standard 48.5″ × 18.5″ × 21.125″ 123.2 × 47 × 53.7 75 gal ~785 lbs / ~356 kg Mfr. Verified
90 Gallon Standard 48.5″ × 18.5″ × 25.125″ 123.2 × 47 × 63.8 90 gal ~1050 lbs / ~476 kg Mfr. Verified

XL Aquariums

Scroll horizontally to view full table
TankConfigL × W × H (in)L × W × H (cm)VolumeEst. Filled Wt.Verification
100 Gallon Standard 72″ × 18″ × 19″ 182.9 × 45.7 × 48.3 100 gal — Multi-Source
120 Gallon Standard 48″ × 24″ × 24″ 121.9 × 61 × 61 120 gal — Multi-Source
125 Gallon Standard 72.5″ × 18.5″ × 23.125″ 184.2 × 47 × 58.7 125 gal ~1400 lbs / ~635 kg Mfr. Verified
150 Gallon Standard 72.5″ × 18.5″ × 29.5″ 184.2 × 47 × 74.9 150 gal ~1800 lbs / ~816 kg Mfr. Verified
180 Gallon Standard 72″ × 24″ × 24″ 182.9 × 61 × 61 180 gal — Multi-Source

All dimensions are nominal external measurements. Internal water-column dimensions are smaller due to glass thickness (typically 0.25–0.375″ per side). Filled weight estimates = water weight at 8.34 lbs/gal + approximate glass weight; excludes substrate, hardscape, and equipment. Sources: primarily Aqueon product specifications (aqueon.com); secondary sources include Marineland, Top Fin, and consensus retail listings.

Side-by-Side

Critical Tank Comparisons

20 Gallon High vs. 20 Gallon Long

Same volume, completely different footprints — do not share a stand.

20G High20G Long
Length 24¼″ 30¼″
Width 12½″ 12½″
Height 16¾″ 12¾″
Best for Community fish, tall plants Bottom dwellers, planted scapes
Stand needed 20G High stand 20G Long stand (different footprint)

60 Gallon Breeder vs. 60 Gallon Tall Popular size comparison

Two completely different tanks with different stands. The Breeder is wide and shallow; the Tall is narrow and deep.

60G Breeder60G Tall
Length 48½″ ~48″
Width 18½″ ~13″
Height 16″ ~24″
Stand matches 75G / 90G stand 55G stand
Best for Breeding, reptiles, sumps, wide aquascapes Tall displays, angel fish
Verification Manufacturer Verified (Aqueon) Multi-Source Standard

75 Gallon vs. 90 Gallon: Identical Footprints

The 75G and 90G share the same 48½″ × 18½″ base. Height (and filled weight) is the only difference.

75 Gallon90 Gallon
Length 48½″ 48½″
Width 18½″ 18½″
Height 21″ 24″
Est. filled wt. ~850 lbs / ~386 kg ~1,050 lbs / ~476 kg
Stand Same 75/90G stand for both Same 75/90G stand for both
Manufacturer Notes

About These Specifications

Aqueon

Primary source for all MANUFACTURER_VERIFIED records on this page. Aqueon publishes nominal external dimensions on their product detail pages. Dimensions rounded to fractional inches.

Visit manufacturer site →

Marineland

Secondary manufacturer source. Dimensions generally align with Aqueon for standard sizes; some variation in glass thickness and exact height.

Visit manufacturer site →

Top Fin (PetSmart)

Retail house brand. Dimensions typically follow industry standard footprints but may vary from unit to unit. Always measure before purchasing lids or sumps.

Visit manufacturer site →

Floor Load & Stand Compatibility

A filled 55-gallon aquarium weighs roughly 625 lbs (~283 kg) including glass but excluding substrate and equipment. A 125-gallon setup can exceed 1,600 lbs (~726 kg). Residential floors are typically rated 40–50 lbs/sq ft, which may be insufficient for large tanks over hardwood or in upper-story rooms. Consult a structural engineer before placing tanks above 55 gallons in any non-concrete location.

Companion Ecosystem

Related Aquarium Calculators

Methodology & Data Quality

Nominal vs. geometric dimensions: Tank sizes like "55 gallon" are nominal marketing designations. Actual volume calculated from external dimensions slightly exceeds the nominal volume due to glass displacement. A true 55-gallon tank's gross external volume calculates to approximately 56.6 gallons (48.25 × 12.75 × 21 ÷ 231).

External vs. internal measurements: All dimensions listed here are external nominal measurements unless explicitly noted. Internal dimensions — which determine actual water column — are smaller by approximately the glass thickness on each side (commonly 0.25″ for small tanks, up to 0.5″ for larger ones).

Rim and trim differences: Plastic rim trims and top frames affect the effective opening size for lids, light fixtures, and hang-on-back filters. The external height includes these frames. Actual water column height may differ from external height by 2–3 inches.

Verification hierarchy: Records marked Manufacturer Verified were confirmed from Aqueon's published product specifications. Records marked Multi-Source Standard reflect dimensions that appear consistently across multiple independent retail and hobbyist sources but were not confirmed from a single primary manufacturer spec page.

Retrieval date: All records were retrieved October 2026. Manufacturer specifications may change without notice.

Frequently Asked Questions About Aquarium Dimensions

What is the difference between nominal and actual tank dimensions?

Nominal size (e.g., "55 gallon") is the marketing volume designation. Actual external dimensions vary by manufacturer and glass thickness. Internal dimensions — what determines usable water volume — are typically 0.25–0.375 inches shorter on each measured side due to glass thickness. Always measure your specific tank before purchasing equipment like lids or sumps.

Why do my 75 gallon tank dimensions look identical to my 90 gallon?

They share the same footprint (approximately 48.5″ × 18.5″). The 90 gallon is simply taller — 24″ versus 21″ for the 75 gallon. This means they use the same stand, same lid, and have the same floor load footprint. Only filled weight and required heater/filter sizing differ.

What makes the 60 gallon breeder different from the 60 gallon tall?

The 60 Gallon Breeder (48.5″ × 18.5″ × 16″) has a wide, shallow footprint matching the 75G and 90G stand width. The 60 Gallon Tall (approximately 48″ × 13″ × 24″) is narrow and tall, sharing the 55G stand footprint. They are fundamentally different tanks requiring different stands, lids, and filtration approaches. Confirm the exact configuration before purchasing.

What is the difference between the 20 gallon High and 20 gallon Long?

The 20 Gallon High (approximately 24.25″ × 12.5″ × 16.75″) is compact and tall — good for community fish that use vertical space. The 20 Gallon Long (approximately 30.25″ × 12.5″ × 12.75″) is wider and shorter — favored for bottom dwellers, planted tanks, and breeding. They do not share the same stand footprint, so verify stand sizing carefully.

Are these dimensions internal or external?

All dimensions listed here are nominal external dimensions as reported by manufacturers or established industry consensus. Internal water-column dimensions are typically 0.25–0.5 inches shorter on each axis due to glass or acrylic thickness. For exact internal measurements, consult your manufacturer's product sheet or measure the tank yourself.

How is filled weight calculated?

Filled weight estimates combine the approximate empty glass weight with the gross water weight (8.34 lbs per US gallon). The figures on this page are broad estimates and do not include substrate, hardscape, equipment, or stand weight. Use our Tank Size Calculator for a more precise breakdown, and verify floor load capacity for tanks above 55 gallons.

What does "verificationStatus" mean?

MANUFACTURER_VERIFIED means the dimensions were confirmed directly from the manufacturer's published product specifications (primarily Aqueon). MULTI_SOURCE_STANDARD means the dimensions appear consistently across multiple independent retail and hobbyist sources but could not be confirmed from a single manufacturer spec page. All records include a measurement source citation and retrieval date.

Can a 60 gallon breeder tank use a 75 gallon stand?

The 60 Gallon Breeder shares the same 48.5″ × 18.5″ base footprint as the Aqueon 75 and 90 gallon tanks, so a 75/90 gallon stand is the correct match. Always verify the stand's rated load capacity covers the full filled weight of your setup, including substrate, hardscape, and equipment.