Aquascaping

How to Prepare Driftwood for an Aquarium

Written by The Aquarium Calculators Editorial Team Updated on
Peer-Reviewed Aquatic Protocol Filtration Benchmarks Verified Bioload Models Dictate Dynamic Capacity

Preparing driftwood before adding it to an aquarium helps remove loose debris, allows the wood to become waterlogged and gives you an opportunity to observe how much colour it releases. If you are still deciding between spider wood, mopani, or manzanita, explore our overview of aquarium driftwood types before starting. The preparation process depends on the wood, its size and its origin. There is no single soaking time or boiling method that applies to every piece.

Before You Prepare Aquarium Driftwood

First consider where the wood came from. Aquarium retailers sell wood selected for aquarium hardscape, but that does not establish that every piece is free of contaminants. Wood collected outdoors has a less certain history. It may have been exposed to substances that are not visible on its surface, and the sources reviewed here do not provide a reliable home test that establishes whether an unknown piece is safe for aquarium use.

Gensou identifies possible concerns with wood of unknown origin, including pesticide exposure and salt residue on beach wood. These are potential risks, not proof that every collected piece is unsafe. If you cannot establish the wood's history, choosing a product sold for aquarium use is the lower-uncertainty option.

1Inspect the Wood

Look over the entire piece before cleaning it. Note loose bark, visible dirt, damaged areas and any material that can be removed without cutting or breaking the wood. Check that the piece is structurally suitable for the aquarium and can be positioned without tipping or rolling.

Do not treat a clean-looking surface as proof that wood of unknown origin is uncontaminated. The sources reviewed do not establish a visual inspection method that can detect pesticide residues or other invisible contaminants.

2Scrub Away Loose Dirt and Debris

Gensou recommends scrubbing driftwood under running water with a stiff brush to remove loose dirt, bark and surface debris. Work over the whole piece, including accessible crevices. The aim is to remove material that is already loose, not to chemically treat or sterilise the wood.

Avoid assuming that brushing removes substances absorbed into the wood. It is a surface-cleaning step, not a contamination test.

3Soak the Driftwood

Place the cleaned wood in a separate container and cover it with water. Soaking allows the piece to take up water and provides a way to observe the colour released into the water before the wood enters the aquarium.

Gensou recommends changing the soaking water daily, or at least every two to three days. Its preparation guide gives an approximate range of one to four weeks for soaking, but this is a retailer's general estimate for its own preparation guidance, not a guaranteed timeline for every wood type or piece.

Zoo Med gives separate instructions for its African Mopani product: soak it in a separate container and change the water daily until the water becomes very light. Follow the instructions for the actual product rather than treating one manufacturer's procedure as universal.

4What If the Driftwood Still Floats?

Consensus Direct Answer

Some pieces remain buoyant when first submerged. Gensou describes spider wood as relatively lightweight and says it may need to be weighed down or secured until it becomes waterlogged. Light Fish also describes spider wood as floating until waterlogged.

Continue observing the piece during soaking. Do not assume that every type of driftwood will sink after the same number of days. If it remains buoyant, use a stable, appropriate method to keep it submerged during preparation, without damaging the wood or introducing unsuitable materials into the water.

Sinking is a practical indication that a piece has become sufficiently waterlogged to remain submerged under those conditions. It is not proof that the wood is free of contaminants.

5Should You Boil Aquarium Driftwood?

Consensus Direct Answer

Some aquarium retailers recommend boiling suitable pieces as part of preparation. The sources reviewed describe boiling as a way to help release soluble compounds, including tannins, and to help waterlog some pieces. They do not establish that boiling a piece makes it sterile or removes pesticides, chemical contaminants or every organism within the wood.

Gensou's preparation guide includes a sterilisation claim, but this guide does not repeat that claim because the available source does not establish that boiling reliably eliminates bacteria, parasites, fungi, spores or chemical contaminants.

There is also no universal instruction to boil every type of aquarium driftwood. Gensou's Malaysian driftwood guide specifically advises against boiling Malaysian wood, noting that many pieces are too large and dense. Follow the supplier's instructions for the actual wood you have. Do not treat pouring boiling water over a large piece as equivalent to boiling it.

6Understand Tannins and Brown Soaking Water

Some driftwood releases tannins and other soluble compounds into the soaking water, producing a tea-like or brown colour. While tinted water is desirable in a blackwater aquarium, soaking in a separate container allows you to observe and manage colour release before placing wood into a clear-water display. For a detailed examination of organic acids and water parameter shifts, see our guide on tannins in fish tanks and water chemistry. The amount and duration vary between pieces. Brown water during soaking does not, by itself, establish that the wood is unsuitable for an aquarium.

Retailer descriptions of tannin release differ between wood types, and even sources discussing Malaysian driftwood disagree about how much tannin it releases. Do not assume that all pieces of one named wood behave identically.

If you want to limit the initial colour change in the aquarium, soaking in a separate container allows you to observe and manage the released colour before adding the wood. It does not guarantee that the wood will stop releasing tannins after it enters the aquarium.

7How Do You Know When Driftwood Is Ready?

Consensus Direct Answer

There is no single visual test that proves driftwood is safe for an aquarium. As practical preparation checks, confirm that loose debris has been removed, the piece has been soaked and observed, and it can remain in the intended position without floating or shifting unexpectedly.

Gensou suggests continuing its soaking routine until the water remains clear after 24 hours and the wood sinks on its own. Treat this as that retailer's preparation recommendation, not a universal safety standard. Clear water does not establish that invisible contaminants are absent.

8Adding Prepared Driftwood to the Aquarium

Before placing the wood, check that it fits the aquarium and cannot tip or roll. Arrange it securely before adding other hardscape elements (as outlined in our guide to aquascaping for beginners) or attaching epiphytes (explored in depth in our guide to best aquarium plants for driftwood, including Anubias Nana and Java Fern). If the wood releases colour after installation, observe the aquarium water rather than assuming that the soaking stage removed all tannins.

If water chemistry is important for the fish or invertebrates you keep, test the aquarium's parameters after adding new wood. Maintaining stable water quality depends on the source water and its buffering characteristics as well as the wood; the appearance of brown water alone cannot tell you the size of any pH change. If you wish to clear residual discoloration from the water column, chemical media (such as activated carbon discussed in our aquarium filtration guide) can be placed in your filter.

Common Driftwood Preparation Mistakes

  • Assuming boiling sterilises wood: The sources reviewed do not establish that boiling reliably removes pathogens or chemical contaminants.
  • Using one soaking timeline for every wood: Individual pieces differ in size, density, buoyancy and soluble compounds released.
  • Treating clear water as proof of safety: Clear soaking water does not detect invisible contaminants.
  • Assuming every wood type should be boiled: Supplier instructions differ, and Gensou advises against boiling Malaysian driftwood.
  • Putting floating wood directly into an unsecured layout: A buoyant piece may shift or tip before it becomes waterlogged.
  • Assuming shop-bought wood is guaranteed contaminant-free: Aquarium retail selection reduces uncertainty about origin but is not a guarantee of zero contamination.

Final Preparation Checklist

  • Consider the source and intended aquarium use of the wood.
  • Inspect the piece and remove loose surface debris.
  • Scrub it with a stiff brush.
  • Soak it in a separate container and change the water regularly.
  • Observe buoyancy and water colour without treating either as a safety test.
  • Check supplier-specific instructions before considering boiling.
  • Make sure the piece can be positioned securely in the aquarium.
  • Monitor aquarium water after installation if tannins or pH changes are a concern.
Precision Aquatic Engine

Run Precision Calculations For Your Setup

Check species compatibility, volumetric displacement, and filtration turnover benchmarks for your specific aquarium parameters.

Frequently Asked Questions

How long should I soak driftwood before putting it in an aquarium?

It depends on the piece. Gensou gives a general range of about one to four weeks in its preparation guide, but this is not a guarantee for every type or size of wood. Observe the soaking water and whether the wood remains buoyant.

Do I have to boil driftwood for an aquarium?

No. The sources reviewed do not establish boiling as a universal requirement. Some retailers recommend it for suitable pieces, but Gensou advises against boiling Malaysian driftwood. Follow the instructions for your specific wood.

Does boiling driftwood sterilise it?

The sources reviewed do not establish that boiling reliably sterilises aquarium driftwood or removes bacteria, parasites, fungi, spores or chemical contaminants. Do not treat boiling as proof that wood of unknown origin is safe.

How do I make aquarium driftwood sink?

Soaking allows wood to take up water. Some lightweight pieces may need to be weighed down or secured during preparation. Gensou describes spider wood as a type that may remain buoyant until waterlogged. There is no guaranteed sinking time for every piece.

Why does my driftwood turn the soaking water brown?

Some wood releases tannins and other soluble compounds into the water, giving it a tea-like colour. The amount varies by piece. Soaking in a separate container lets you observe the colour before adding the wood to the aquarium.

Can I use driftwood collected outdoors?

Wood collected outdoors has an uncertain exposure history. Gensou identifies possible concerns such as pesticide exposure and salt residue on beach wood. The sources reviewed do not provide a reliable home test to establish that unknown wood is free of contaminants. Aquarium-sold wood is the lower-uncertainty option, although it is not guaranteed contaminant-free.

Should I boil Malaysian driftwood?

Gensou's Malaysian driftwood preparation guide advises against boiling it, noting that many pieces are too large and dense. Follow the supplier's instructions and use scrubbing and soaking as the documented preparation alternatives.

Does soaking remove all tannins from driftwood?

No. Soaking can release some soluble compounds before the wood enters the aquarium, but it does not guarantee that the wood will stop releasing tannins after installation.

Sources & References